关于telnet到RedHat Linux失败的解决办法详解

失败原因:

1.telnet包未安装,检查telnet包是否安装:  

[root@vm-rhel root]# rpm -qa telnet telnet-0.17-25

 表示已安装

 2.telnet包已安装,telnet-server未安装,检查telnet-server包是否安装:

[root@vm-rhel root]# rpm -qa telnet-server telnet-server-0.17-25

 表示已安装

 3.telnet配置文件问题:

[root@vm-rhel root]# cat /etc/xinetd.d/telnet# default: on# description: The telnet server serves telnet sessions; it uses #    unencrypted username/password pairs for authentication.service telnet{    flags        = REUSE    socket_type    = stream            wait        = no    user        = root    server        = /usr/sbin/in.telnetd    log_on_failure    += USERID    disable        = yes }

将disable对应的值修改为no或者注释该行并重启xinetd守护进程:service xinetd restart。

4.Linux防火墙原因,查看防火墙状态:

[root@vm-rhel root]# service iptables statusTable: filterChain INPUT (policy ACCEPT)target prot opt source destination RH-Lokkit-0-50-INPUT all -- anywhere anywhereChain FORWARD (policy ACCEPT)target prot opt source destination RH-Lokkit-0-50-INPUT all -- anywhere anywhereChain OUTPUT (policy ACCEPT)target prot opt source destinationChain RH-Lokkit-0-50-INPUT (2 references)target prot opt source destination ACCEPT udp -- 192.168.1.1 anywhere udp spt:domain dpts:1025:65535 ACCEPT tcp -- anywhere anywhere tcp dpt:smtp flags:SYN,RST,ACK/SYN ACCEPT tcp -- anywhere anywhere tcp dpt:http flags:SYN,RST,ACK/SYN ACCEPT tcp -- anywhere anywhere tcp dpt:ftp flags:SYN,RST,ACK/SYN ACCEPT tcp -- anywhere anywhere tcp dpt:ssh flags:SYN,RST,ACK/SYN ACCEPT tcp -- anywhere anywhere tcp dpt:telnet flags:SYN,RST,ACK/SYN ACCEPT udp -- anywhere anywhere udp spts:bootps:bootpc dpts:bootps:bootpc ACCEPT udp -- anywhere anywhere udp spts:bootps:bootpc dpts:bootps:bootpc ACCEPT all -- anywhere anywhere ACCEPT all -- anywhere anywhere REJECT tcp -- anywhere anywhere tcp dpts:0:1023 flags:SYN,RST,ACK/SYN reject-with icmp-port-unreachable REJECT tcp -- anywhere anywhere tcp dpt:nfs flags:SYN,RST,ACK/SYN reject-with icmp-port-unreachable REJECT udp -- anywhere anywhere udp dpts:0:1023 reject-with icmp-port-unreachable REJECT udp -- anywhere anywhere udp dpt:nfs reject-with icmp-port-unreachable REJECT tcp -- anywhere anywhere tcp dpts:x11:6009 flags:SYN,RST,ACK/SYN reject-with icmp-port-unreachable REJECT tcp -- anywhere anywhere tcp dpt:xfs flags:SYN,RST,ACK/SYN reject-with icmp-port-unreachable

表示未关闭,如果防火墙已关闭,则不需要在/etc/sysconfig/iptables配置文件中添加:-A RH-Lokkit-0-50-INPUT -p tcp -m tcp –dport 23 –syn -j ACCEPT。

关闭防火墙:service iptables stop (重启后失效:防火墙开机自动启动)

启动防火墙:service iptables start

轻舟办公 轻舟办公

基于AI的智能办公平台

轻舟办公 194 查看详情 轻舟办公

重启防火墙:service iptables restart

禁止防火墙开机自动启动:chkconfig iptables off

5.默认情况下Linux不允许root用户以telnet方式登录Linux主机,若要允许root用户登录可采用以下3中方法:

  (1)修改/etc/pam.d/login配置文件

         RedHat Linux对于远程登录的限制体现在/etc/pam.d/login文件中,把限制内容注释即可。

[root@vm-rhel root]# cat /etc/pam.d/login#%PAM-1.0auth       required    pam_securetty.soauth       required    pam_stack.so service=system-auth#auth       required    pam_nologin.soaccount    required    pam_stack.so service=system-authpassword   required    pam_stack.so service=system-authsession    required    pam_stack.so service=system-authsession    optional    pam_console.so

  (2)移除/etc/securetty文件夹

          验证规则设置在/etc/securetty文件中,该文件定义了root用户只能在tty1-tty6的终端上记录,删除该文件或将其改名即可避开验证规则从而实现root用户以telnet方式远程登录Linux主机。

[root@vm-rhel root]# mv /etc/securetty /etc/securetty.bak

  (3)先用普通用户登录,然后切换到root用户

[bboss@vm-rhel bboss]$ su rootPassword: [root@vm-rhel bboss]#

 

以上就是关于telnet到RedHat Linux失败的解决办法详解的详细内容,更多请关注创想鸟其它相关文章!

版权声明:本文内容由互联网用户自发贡献,该文观点仅代表作者本人。本站仅提供信息存储空间服务,不拥有所有权,不承担相关法律责任。
如发现本站有涉嫌抄袭侵权/违法违规的内容, 请发送邮件至 chuangxiangniao@163.com 举报,一经查实,本站将立刻删除。
发布者:程序猿,转转请注明出处:https://www.chuangxiangniao.com/p/343403.html

(0)
打赏 微信扫一扫 微信扫一扫 支付宝扫一扫 支付宝扫一扫
上一篇 2025年11月5日 19:23:00
下一篇 2025年11月5日 19:24:18

相关推荐

发表回复

登录后才能评论
关注微信