失败原因：
1.telnet包未安装，检查telnet包是否安装：
[root@vm-rhel root]# rpm -qa telnet telnet-0.17-25
表示已安装
2.telnet包已安装，telnet-server未安装，检查telnet-server包是否安装：
[root@vm-rhel root]# rpm -qa telnet-server telnet-server-0.17-25
表示已安装
3.telnet配置文件问题：
[root@vm-rhel root]# cat /etc/xinetd.d/telnet# default: on# description: The telnet server serves telnet sessions; it uses # unencrypted username/password pairs for authentication.service telnet{ flags = REUSE socket_type = stream wait = no user = root server = /usr/sbin/in.telnetd log_on_failure += USERID disable = yes }
将disable对应的值修改为no或者注释该行并重启xinetd守护进程：service xinetd restart。
4.Linux防火墙原因，查看防火墙状态：
[root@vm-rhel root]# service iptables status
Table: filter
Chain INPUT (policy ACCEPT)
target prot opt source destination
RH-Lokkit-0-50-INPUT all — anywhere anywhere
Chain FORWARD (policy ACCEPT)
target prot opt source destination
RH-Lokkit-0-50-INPUT all — anywhere anywhere
Chain OUTPUT (policy ACCEPT)
target prot opt source destination
Chain RH-Lokkit-0-50-INPUT (2 references)
target prot opt source destination
ACCEPT udp — 192.168.1.1 anywhere udp spt:domain dpts:1025:65535
ACCEPT tcp — anywhere anywhere tcp dpt:smtp flags:SYN,RST,ACK/SYN
ACCEPT tcp — anywhere anywhere tcp dpt:http flags:SYN,RST,ACK/SYN
ACCEPT tcp — anywhere anywhere tcp dpt:ftp flags:SYN,RST,ACK/SYN
ACCEPT tcp — anywhere anywhere tcp dpt:ssh flags:SYN,RST,ACK/SYN
ACCEPT tcp — anywhere anywhere tcp dpt:telnet flags:SYN,RST,ACK/SYN
ACCEPT udp — anywhere anywhere udp spts:bootps:bootpc dpts:bootps:bootpc
ACCEPT udp — anywhere anywhere udp spts:bootps:bootpc dpts:bootps:bootpc
ACCEPT all — anywhere anywhere
ACCEPT all — anywhere anywhere
REJECT tcp — anywhere anywhere tcp dpts:0:1023 flags:SYN,RST,ACK/SYN reject-with icmp-port-unreachable
REJECT tcp — anywhere anywhere tcp dpt:nfs flags:SYN,RST,ACK/SYN reject-with icmp-port-unreachable
REJECT udp — anywhere anywhere udp dpts:0:1023 reject-with icmp-port-unreachable
REJECT udp — anywhere anywhere udp dpt:nfs reject-with icmp-port-unreachable
REJECT tcp — anywhere anywhere tcp dpts:x11:6009 flags:SYN,RST,ACK/SYN reject-with icmp-port-unreachable
REJECT tcp — anywhere anywhere tcp dpt:xfs flags:SYN,RST,ACK/SYN reject-with icmp-port-unreachable
表示未关闭,如果防火墙已关闭，则不需要在/etc/sysconfig/iptables配置文件中添加：-A RH-Lokkit-0-50-INPUT -p tcp -m tcp –dport 23 –syn -j ACCEPT。
因赛AIGC
因赛AIGC解决营销全链路应用场景
73 查看详情
关闭防火墙：service iptables stop (重启后失效：防火墙开机自动启动)
启动防火墙：service iptables start
重启防火墙：service iptables restart
禁止防火墙开机自动启动：chkconfig iptables off
5.默认情况下Linux不允许root用户以telnet方式登录Linux主机，若要允许root用户登录可采用以下3中方法：
（1）修改/etc/pam.d/login配置文件
RedHat Linux对于远程登录的限制体现在/etc/pam.d/login文件中，把限制内容注释即可。
[root@vm-rhel root]# cat /etc/pam.d/login#%PAM-1.0auth required pam_securetty.soauth required pam_stack.so service=system-auth#auth required pam_nologin.soaccount required pam_stack.so service=system-authpassword required pam_stack.so service=system-authsession required pam_stack.so service=system-authsession optional pam_console.so
（2）移除/etc/securetty文件夹
验证规则设置在/etc/securetty文件中，该文件定义了root用户只能在tty1-tty6的终端上记录，删除该文件或将其改名即可避开验证规则从而实现root用户以telnet方式远程登录Linux主机。
[root@vm-rhel root]# mv /etc/securetty /etc/securetty.bak
（3）先用普通用户登录，然后切换到root用户
[bboss@vm-rhel bboss]$ su rootPassword: [root@vm-rhel bboss]#
以上就是telnet到RedHat Linux失败原因、解决方法的详细内容，更多请关注创想鸟其它相关文章！
版权声明：本文内容由互联网用户自发贡献，该文观点仅代表作者本人。本站仅提供信息存储空间服务，不拥有所有权，不承担相关法律责任。
如发现本站有涉嫌抄袭侵权/违法违规的内容， 请发送邮件至 chuangxiangniao@163.com 举报，一经查实，本站将立刻删除。
发布者：程序猿，转转请注明出处：https://www.chuangxiangniao.com/p/289632.html
微信扫一扫 
支付宝扫一扫 
