Voice Liveness Challenge

while implementing an active challenge/response mechanism to verify the liveness of a subject in a biometric authentication system can significantly enhance security, it also places an additional burden on the user. requiring users to perform specific actions can prolong the authentication process, increase the chance of user mistakes, and result in missed detections.

Voice Liveness ChallengeThis can ultimately hinder the adoption of the technology. Consequently, the TrulySecure Voice Liveness Challenge has been carefully crafted to strike a balance between ease of use and security. It is both robust and user-friendly, ensuring that the enrollment and authentication processes remain relatively swift. It also provides flexibility in implementation, allowing for adjustments in ease of use and security tailored to specific applications.

TrulySecure Voice Liveness Challenge

Following the verification of the user’s passphrase during an authentication attempt, the TrulySecure Voice Liveness Challenge prompts the user to sequentially speak a short series of two-digit numbers. These numbers are randomly selected from a set previously enrolled by the user.

To reduce the duration of the initial enrollment process, this set of numbers is expanded over time using utterances captured during authentication attempts. As outlined below, the liveness challenge can be configured in various ways to optimize the system for security and user-friendliness.

Voice Liveness ChallengeThis system design offers several significant advantages over other voice liveness challenge methods, which are also detailed below.

Enrollment – The enrollment process begins with the user enrolling their chosen passphrase, as is standard in TrulySecure, by repeating it three times. Subsequently, the user is prompted to enroll three two-digit numbers, each following the same procedure used for the passphrase. These numbers are randomly selected by the system.

Authentication – During authentication, the user is first asked to provide their passphrase. The system then displays a sequence of three two-digit numbers. Two of these are randomly chosen from the enrolled set, serving as the liveness test.

Augmentation – The third number shown to the user is randomly selected from the set of unenrolled numbers. The audio from this number is then used to add it to the enrolled set for future liveness tests.

Enrollment

● The user is asked to repeat their chosen passphrase (e.g., “My Voice Is My Password”) three times.

● The user is then prompted to enroll three two-digit numbers:

○ The system shows “27” and the user says “twenty-seven” (this is repeated three times to complete the enrollment of that number).

○ The system shows “84” and the user says “eighty-four” (this is repeated three times to complete the enrollment of that number).

○ The system shows “67” and the user says “sixty-seven” (this is repeated three times to complete the enrollment of that number).

Authentication

● The user speaks their chosen passphrase (e.g., “My Voice Is My Password”).

● The user is then randomly prompted to say two of the enrolled two-digit numbers, plus a third unenrolled two-digit number (the sequence can vary):

○ The system shows “67” and the user says “sixty-seven”.

○ The system shows “84” and the user says “eighty-four”.

○ The system shows “53” and the user says “fifty-three”.

● If the user’s passphrase and the two enrolled numbers match the system’s speaker verification test, the user is authenticated.

Augmentation

响应式WordPress新闻杂志或者博客网站主题-Voice 响应式WordPress新闻杂志或者博客网站主题-Voice

wordpress博客,wordpress新闻,wordpress杂志,wordpress主题,Voice

响应式WordPress新闻杂志或者博客网站主题-Voice 221 查看详情 响应式WordPress新闻杂志或者博客网站主题-Voice

● The audio of the unenrolled two-digit number (“fifty-three” in this example) is saved for future enrollment. Once the user has spoken this number three times, the system enrolls it and adds it to the list for future liveness prompts.

Benefits

The choice of two-digit numbers as the liveness passphrases in the TrulySecure Voice Liveness Challenge provides several key advantages:

● These numbers are universally recognized symbols, understood globally by speakers of various languages. They can be spoken with any accent without affecting performance, as the verification process is language-independent.

● They can be articulated in any language (e.g., “vingt-sept” in French instead of “twenty-seven”), requiring no changes to the system. This eliminates the need for user interface localization, simplifying app maintenance (fewer versions to manage and less testing needed per release). Additionally, it removes the necessity for language-specific voice models, which require extensive data collection and tuning for each supported language, resulting in a smaller download package.

● They consist of multiple syllables, improving accuracy compared to single-syllable passphrases, which are more challenging to use.

● They enable the development of a large enrolled set from which to draw liveness prompts (90 possibilities for two-digit numbers from 10 to 99).

● They allow the system to scale to desired security levels:

○ More two-digit numbers can be required during enrollment to enhance initial security (at the cost of a longer enrollment process).

○ More two-digit numbers can be required during authentication.

○ The system can incorporate larger sets of numbers, including three-digit or higher numbers.

Some existing biometric systems use single-digit liveness challenges. Single digits are appealing because they are also universally recognized and offer a similar experience to text-based one-time passwords, familiar to consumers. For example, a single-digit liveness check might require the user to enroll by speaking a complete string of single digits multiple times and then authenticate by speaking a shorter string (e.g., during authentication, displaying “17945”, to which the user says “one seven nine four five” in English). However, this method has significant drawbacks:

● It requires language-specific parsing of the utterance to recognize each digit during enrollment and authentication. Strong accents can make parsing more challenging and less accurate. If the user wishes to speak in a different language, a different language model is needed for parsing.

● It is less intuitive and robust than the two-digit number system. If the user misinterprets the prompt and does not speak the digits individually (e.g., saying “seventeen nine forty-five” instead of “one seven nine four five”), the system will fail. (In the TrulySecure system, the user only needs to be consistent in their response to the prompt.)

● The enrollment process is lengthy, requiring all ten digits to be spoken multiple times. Most single digits in English have only one syllable, which limits the system’s accuracy. This can be mitigated by requesting more digits, but it increases the risk of an attacker recording a substantial portion of the enrolled prompts during a single authentication event.

● The system’s security is constrained by the limited number of digits and cannot be scaled. Single-digit systems are limited to ten different inputs for prompts. An attacker who records all or a subset of these digits can easily splice them together to spoof the system.

Alternative Configurations

One approach to further reduce the enrollment process in the TrulySecure Voice Liveness Challenge is to initially enroll only the user-defined passphrase. The numbers are then enrolled over time using the augmentation method described above. This means there would be no liveness check for the first few authentication attempts, but the enrolled phrase list would quickly expand and become effective.

Another potential implementation of the TrulySecure Voice Liveness Challenge, yet to be developed, could replace two-digit numbers with a different set of non-linguistic, unambiguous symbols, such as photos of objects or emojis.

For instance, images of fruits (banana, orange, apple, pear, etc.) could be used. Similar to the two-digit numbers, the enrolled set could grow over time. As long as each user consistently translates each symbol into an utterance, the system will scale effectively.

Allowing users to choose the type of challenge could serve a dual purpose. Authentication systems often include a “reverse authentication” feature to assure the user that the system is legitimate and not a phishing attack, typically through an image selected at account creation. By letting users choose their challenge prompt category, they also gain reassurance that the system is authentic.

以上就是Voice Liveness Challenge的详细内容,更多请关注创想鸟其它相关文章!

版权声明:本文内容由互联网用户自发贡献,该文观点仅代表作者本人。本站仅提供信息存储空间服务,不拥有所有权,不承担相关法律责任。
如发现本站有涉嫌抄袭侵权/违法违规的内容, 请发送邮件至 chuangxiangniao@163.com 举报,一经查实,本站将立刻删除。
发布者:程序猿,转转请注明出处:https://www.chuangxiangniao.com/p/471735.html

(0)
打赏 微信扫一扫 微信扫一扫 支付宝扫一扫 支付宝扫一扫
上一篇 2025年11月8日 07:45:55
下一篇 2025年11月8日 07:50:16

相关推荐

  • Highcharts 实现堆叠柱状图与动态折线图联动

    本文介绍了如何使用 Highcharts 创建包含堆叠柱状图和两条折线图的组合图表,并实现堆叠柱状图的显示/隐藏事件与折线图数据动态更新的联动效果。通过配置 series 类型、堆叠方式以及利用 show/hide 事件,可以轻松实现这一复杂的数据可视化需求。 创建堆叠柱状图与折线图组合 要在 Hi…

    2025年12月20日
    000
  • Promise的基本用法与示例

    promise是javascript中处理异步操作的现代方案,通过1.创建promise实例,传入执行器函数;2.在异步操作成功或失败时分别调用resolve或reject;3.使用.then()、.catch()和.finally()处理结果,使异步代码更清晰且类似同步流程。链式调用通过返回新pr…

    2025年12月20日 好文分享
    000
  • 使用Puppeteer获取按钮触发的动态下载链接

    本文详细介绍了如何使用Puppeteer处理不直接包含URL的动态下载按钮。通过拦截网络请求,特别是利用page.waitForRequest和Promise.all,可以在点击按钮后捕获到实际触发的下载链接,从而实现自动化下载,解决了传统HTML解析无法获取动态生成链接的问题。 1. 问题背景:动…

    2025年12月20日
    000
  • JavaScript如何用数组的values方法遍历元素

    javascript中数组的values()方法返回一个迭代器对象,用于遍历数组中的每个值。1. 该方法生成array iterator对象,可通过for…of循环或手动调用next()获取值;2. 每次调用next()返回{value: 值, done: 布尔},done为true表示…

    2025年12月20日 好文分享
    000
  • 如何用BOM实现模态对话框?

    现代web开发更倾向于自定义模态框而非原生bom方法,主要是因为原生对话框样式固定、功能受限且阻塞主线程,破坏用户体验和交互流程。1. 原生对话框无法定制外观,与现代设计风格不匹配;2. 它们是阻塞式交互,中断用户操作;3. 功能单一,无法承载复杂内容;4. 可访问性和国际化支持不足。实现一个基础b…

    2025年12月20日 好文分享
    000
  • 使用 Puppeteer 捕获按钮触发的下载链接

    本文详细介绍了如何利用 Puppeteer 拦截网络请求,以获取那些不直接暴露下载链接,而是通过点击按钮触发文件下载的场景中的实际下载 URL。我们将探讨如何结合 page.waitForRequest 和 Promise.all 来精确捕获目标请求,并提供实用的代码示例和注意事项,帮助开发者高效地…

    2025年12月20日
    000
  • JavaScript如何用逻辑赋值运算符简化操作

    javascript中的逻辑赋值运算符通过结合逻辑判断与赋值操作提升代码简洁性。1. ||=(逻辑或赋值)在左侧为假值(如false、0、空字符串、null、undefined、nan)时赋值,适用于设置默认值;2. ??=(空值合并赋值)仅在左侧为null或undefined时赋值,避免误判0、空…

    2025年12月20日 好文分享
    000
  • JavaScript如何用for…of遍历数组

    1.for…of循环用于遍历数组元素值,语法简洁直观;2.获取索引需结合entries()方法与解构赋值;3.for…of遍历值而for…in遍历键;4.支持break和continue实现中断或跳过。在javascript中,for…of循环专为迭代…

    2025年12月20日 好文分享
    000
  • JavaScript中异步迭代的实现方式

    javascript中实现异步迭代的核心在于利用for await…of循环配合实现了symbol.asynciterator接口的对象,使得处理异步数据流如同同步遍历一样直观。1. 异步迭代依赖于symbol.asynciterator协议,要求对象必须有一个以该符号为键的方法,返回一…

    2025年12月20日 好文分享
    000
  • JavaScript的removeChild方法是什么?如何使用?

    javascript的removechild方法用于从父节点中移除指定的子节点,但被移除的节点仍保留在内存中可被重新使用。1.使用时需先获取父节点和子节点,语法为var removedchild = parentnode.removechild(childnode); 2.该方法返回被移除的节点,便…

    2025年12月20日 好文分享
    000
  • Puppeteer 自动化:捕获动态按钮触发的网络请求URL

    本文详细介绍了如何在使用 Puppeteer 自动化操作时,获取那些不直接暴露链接的按钮所触发的动态下载或API请求的URL。通过利用 Puppeteer 的网络请求拦截功能,结合 page.waitForRequest 方法,您将学习如何在点击按钮后捕获并解析其背后的实际数据源链接,从而实现对动态…

    2025年12月20日
    000
  • 使用 Puppeteer 自动化获取动态下载按钮链接的策略

    本文详细介绍了如何利用 Puppeteer 应对网页中不直接暴露下载链接的动态按钮。通过拦截网络请求,特别是利用 page.waitForRequest 监听特定类型的请求,可以精准捕获到由按钮点击触发的实际下载 URL。教程涵盖了从环境搭建、页面导航、模拟点击到请求捕获的全过程,并提供了详细的代码…

    2025年12月20日
    000
  • 使用Puppeteer捕获按钮点击后的动态下载URL

    本文详细介绍了如何利用Puppeteer库在Node.js环境中,通过拦截网络请求来获取由按钮点击触发的动态生成下载链接。当目标文件的下载URL并非直接嵌入在HTML元素中时,而是通过JavaScript异步请求产生时,传统的DOM解析方法将失效。本教程将引导读者使用page.waitForRequ…

    2025年12月20日
    000
  • React Router v6:构建受保护的嵌套路由与动态仪表盘布局

    或 <route path="*" element="{} /> 来处理用户访问不存在的 URL 的情况,提升用户体验。加载状态与错误处理:在实际的 ProtectedRoute 中,你可能需要处理异步认证检查时的加载状态,以及认证失败时的错误提示。 通过上…

    2025年12月20日
    000
  • React Router v6 中嵌套路由与保护路由的实现指南

    表示当 URL 精确匹配到 /dashboard 时,WelcomeDashboard 组件将被渲染到 Layout 的 Outlet 中。这是一个很好的实践,为父路由提供默认内容。Navigate 组件: 当需要进行程序化导航或重定向时,Navigate 组件非常有用。在 ProtectedRou…

    2025年12月20日
    000
  • 如何正确运行从GitHub下载的React/Next.js项目

    本文旨在指导用户如何解决从GitHub下载React或Next.js项目后无法启动的问题。核心原因在于项目仓库通常不包含庞大的node_modules依赖文件夹。教程将详细介绍通过执行npm install命令安装所有必要的依赖,以及随后使用npm start(或npm run dev)命令成功启动…

    2025年12月20日
    000
  • JavaScript的Promise对象是什么?如何使用?

    promise在现代javascript中如此重要,是因为它解决了传统回调函数地狱的问题,使异步代码更易读、可维护。1. promise通过三种状态(待定、已兑现、已拒绝)提供清晰的异步操作流程;2. 支持链式调用,通过.then()和.catch()实现扁平化结构和统一错误处理;3. 提供静态方法…

    2025年12月20日 好文分享
    000
  • 如何用Promise封装异步操作

    promise封装异步操作的核心在于使用new promise()构造函数,它接收一个执行器函数,该函数包含resolve和reject两个参数,分别用于处理成功与失败的情况。1. promise通过.then()链式调用让代码更扁平、可读性更高;2. 使用.catch()统一捕获错误,提升健壮性;…

    2025年12月20日 好文分享
    000
  • 运行从GitHub下载的React/Next.js项目:常见问题与解决方案

    本文旨在解决从GitHub下载React/Next.js项目后无法启动的常见问题。核心在于理解Node.js项目依赖管理,特别是node_modules文件夹通常不包含在Git仓库中。教程将详细指导如何通过简单的npm install命令安装所有必要的项目依赖,并最终成功启动应用程序,确保开发者能够…

    2025年12月20日
    000
  • React/Next.js项目启动指南:从GitHub下载到成功运行

    本文详细介绍了从GitHub下载React或Next.js项目后如何正确配置并成功运行。核心步骤包括理解node_modules缺失的原因,以及通过执行npm install命令安装所有项目依赖,随后使用npm start命令启动应用程序。本指南旨在帮助开发者顺利启动其下载的基于React/Next…

    2025年12月20日
    000

发表回复

登录后才能评论
关注微信